Motorola Noise-com ENMN4010 매뉴얼 - 페이지 5

{카테고리_이름} Motorola Noise-com ENMN4010에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola Noise-com ENMN4010 32 페이지.

Note:

Pressing the radio Push-To-Talk button will

temporarily disable VOX operation.

Communication can continue using the radio

microphone and the radio Push-To-Talk

button.

8. To re-select VOX operation, turn the radio

OFF and repeat the set up procedure

Steps 1 to 6.

Push To Talk (PTT) Operation:

1. Always switch the radio OFF before

connecting the noise-com unit.

2. Attach the audio connector to the radio taking

care not to over tighten the fixing screw.

3. Switch the radio ON - care should be taken

not to set the volume level too loud.

4. Press the noise-com Push-To-Talk button and

speak into the noise-com microphone

Fig. 1 (3) to check that the two-way

communication is working.

5. Adjust the noise-com speaker audio level

using the radio volume control.

6. Always switch the radio OFF before removing

the noise-com unit.

Removing the noise-com unit from the ear

protector

1. Always switch the radio OFF before removing

the noise-com unit.

2. Turn the complete unit 90

in the ear protector.

3. Remove it carefully from the ear protector.

counter clockwise