Motorola XBT 사용자 설명서 - 페이지 5

{카테고리_이름} Motorola XBT에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola XBT 9 페이지.

PAIRING WITH RADIO

Before the XBT headset can be used it must be paired with

a radio.

1. Turn off any radios previously paired with the headset.

2. Ensure Bluetooth is enabled on the radio. Contact your

radio dealer if unsure.

3. Power up the headset.

4. Place the headset in pairing mode by pressing and

holding the volume up and down buttons together

for 5 seconds. The left indicator light will be blue and

momentarily flash off while pairing mode is active.

5. Follow radio pairing instructions to pair the XBT headset

with the radio. If prompted for a passkey enter 0000.

6. Once paired the headset will automatically connect

and the left indicator light will show a blue slow flash once

connected. Note: It may take up to 90 seconds to connect.

Note: When entering pairing mode the headset forgets all

previously paired devices.

LEFT INDICATOR LIGHT

Blue slow flash: Bluetooth connected

Blue momentary off: Headset in pairing mode

Blue on: PTT active

TESTING CONNECTION

While wearing the headset press and hold the PTT

button to communicate through the radio system.

RECONNECTING

When the headset is powered up it will automatically

attempt to reconnect to the last paired radio.

Note: If the bluetooth connection is lost press the PTT

button to initiate a reconnection from the headset. If

you have problems reconnecting, check the radio is

discoverable.

Note: You may exist pairing mode on the headset by

pressing the PTT button.