Motorola CPEi 23800 사용자 설명서 - 페이지 11

{카테고리_이름} Motorola CPEi 23800에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola CPEi 23800 50 페이지. Cpei 800 series

Advanced Setup

The CPE can also be used to connect to a multi-port switch (hub) - purchased

separately from the CPE. Connecting the CPE device to a hub allows you to connect

more than one computer to your CPE device.

Before you Begin Configuration

Some settings on your computer need to be verified or changed to ensure that your

computer configuration can support the Desktop CPE.

Verify that the IP addresses and DNS settings are automatically generated in your

Local Area connection of your Internet Protocol (TCP/IP) properties. Refer to the

chapter titled "Configuring TCP/IP" for additional information.

Logging in to the CPE

Use the following procedure to log into the Desktop CPE:

1. On a computer that is connected to the Desktop CPE, open a web browser.

2. In the Address or Location field, type http://mywimax. and press ENTER to

3. The Welcome to Motorola WiMAX CPE screen is displayed and prompts you for a

2-2

display the login screen.

Include the period (.) after http://mywimax. in order to access the login screen.

NOTE

Enter the IP address: http://192.168.15.1 into Address field in order to gain

access to your CPE. If you cannot access the CPE, refer to the chapter

titled: Configuring TCP/IP for more information.

password.

Installation

OCT 2010