Motorola MG8702 빠른 시작 매뉴얼 - 페이지 15
{카테고리_이름} Motorola MG8702에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola MG8702 18 페이지. Docsis 3.1 modem + ac3200 wifi router
Motorola MG8702에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (21 페이지), 빠른 시작 매뉴얼 (21 페이지)
페이지 인쇄
What if I don't know my MG8702's Wireless Network
Name/SSID or Security Key/Password?
The default values are printed on the bottom label of the
MG8702. Use these unless you changed them. If you changed
them, try to remember where you put the new values. If you
have a device that connects wirelessly to the MG8702, it may
show the Wireless Network Name/SSID and Password. You
can also find this information in the MG8702 Configuration
Manager. Information about using this is in the Configuration
Manager section above.
If all else fails, reset the device to factory defaults by holding
the Reset button for 10 seconds. (A paperclip helps.) You can
then use the default values.
What if I think that wireless devices are interfering with my
MG8702 wireless router?
1.
Where possible, put the MG8702 as far away as possible
from interfering devices such as Bluetooth transmitters
and neighbors' WiFi routers.
2.
To try to pick a less used wireless channel for your
MG8702, first go in to your MG8702's Configuration
Manager.
3.
Click the Advanced button at the top of the page, then
click the Wireless and Scan/Bridge menu items at the top
of the page.
4.
Click the ScanWirelessAPs button. A list will appear of
competing wireless networks, including the channels they
are using. Write down one or more of the less used
channel numbers, since a less used channel should be
better for your MG8702.
5.
On the top of the page, click the Wireless Basic menu item.
6.
On the Basic page, select the channel you want in the
Channel pulldown, then click Save.
Do you have any other questions? We have lots more
information at www.motorolanetwork.com/mentor