Motorola SBG-940 빠른 설치 매뉴얼 - 페이지 12

{카테고리_이름} Motorola SBG-940에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola SBG-940 16 페이지. Surfboard wireless cable modem gateway

SBG940 Wireless Cable Modem Gateway

If all of your wireless clients support Wi-Fi Protected Access (WPA),

Motorola recommends configuring WPA on your SBG940 and wireless

clients. You can use the same WPA Passphrase on the SBG940 and any

wireless adapter that supports WPA.

Otherwise, configure a Wired Equivalency Privacy (WEP) key on the

SBG940 and each wireless client. You can use the same WEP key on the

SBG940 and any Motorola 802.11g wireless adapter.

To further protect from unauthorized intrusions, you can:

Configure a MAC access control list to restrict wireless local-area network

(WLAN) access to known MAC addresses.

Disable ESSID broadcasting to prevent unauthorized individuals who scan

for unsecured WLANs from accessing your WLAN.

For more information and procedures to enable these security measures, see

"Setting Up Your Wireless LAN" in the SBG940 User Guide.

Wireless Security on the Clients

After enabling wireless security on the SBG940, as required on each

wireless client:

If you enabled WPA on the SBG940, set the client WPA Passphrase

identical to the WPA Passphrase on the SBG940.

If you enabled WEP on the SBG940, set the client WEP key identical to the

WEP key on the SBG940.

If you disabled ESSID broadcasting on the SBG940, set the client Network

Name (ESSID) identical to the ESSID on the SBG940.