Motorola SBG-940 빠른 설치 매뉴얼 - 페이지 6

{카테고리_이름} Motorola SBG-940에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola SBG-940 16 페이지. Surfboard wireless cable modem gateway

SBG940 Wireless Cable Modem Gateway

Connecting to the Cable Outlet Using a Splitter

Connecting an SBG940 to the same cable outlet as a TV requires a

5 to 900 MHz splitter and two additional coaxial cables. If a coaxial cable is

already connecting your TV to the cable wall outlet, disconnect it from the TV.

Connect one end of a coaxial cable to the cable TV wall outlet and connect

the other end to the splitter input.

Connect one end of a second coaxial cable to the splitter output and

connect the other end to your TV.

Connect one end of a third coaxial cable to the other splitter output and

connect the other end to the cable connector on your SBG940.

Connect one end of the AC power cord into the power connector on the

SBG940 and plug the other end into an AC wall outlet, surge protector,

or UPS. This turns the SBG940 on.

If, after a few minutes, the power, DS, US, and ONLINE lights on the front

panel light solid green, continue with Section B, C, or D. Otherwise,

contact your cable provider and provide your MAC address.