Motorola SM56 빠른 시작 사용 설명서 - 페이지 17
{카테고리_이름} Motorola SM56에 대한 빠른 시작 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola SM56 22 페이지. Software modem
Motorola SM56에 대해서도 마찬가지입니다: 빠른 시작 사용 설명서 (13 페이지), 빠른 시작 사용 설명서 (48 페이지), 명령 참조 설명서에서 (42 페이지)
페이지 인쇄
4. Speak into the microphone at a distance of at least 12 inches (30 cm) from your mouth.
Minimize background noise.
5. If there is still feedback, turn off the microphone boost, under the volume control panel.
•
The modem connects; then meaningless characters appear
1. Open the Control Panel. Double click the Modem icon.
2. Select the Motorola SM56 modem
3. Click on Properties.
4. Select Connection.
5. Click on Advanced.
6. Check the Use Error Control-Required to Connect box.
•
The modem cannot connect; the Error Control option is selected
The modem may be connecting at a rate higher than appropriate for the line conditions.
1. Use the AT%B command to limit the SM56 maximum connection rate. (For a list of AT
commands, refer to the on-line User's Guide.)
2. Lower the rate, using AT commands, until the problem is corrected. You can add AT
commands to do this; refer to the next section .
• How to Add AT Commands
1. Open the Control Panel.
2. Double-click the Modem icon.
3. Select the Motorola SM56 modem.
4. Click on Properties.
5. Select Connection.
6. Click on Advanced.
7. In the Extra Settings box, add commands as needed. You do not need to enter the AT prefix,
but it will not hurt if you do.