Motorola SM56 빠른 시작 사용 설명서 - 페이지 7
{카테고리_이름} Motorola SM56에 대한 빠른 시작 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola SM56 22 페이지. Software modem
Motorola SM56에 대해서도 마찬가지입니다: 빠른 시작 사용 설명서 (13 페이지), 빠른 시작 사용 설명서 (48 페이지), 명령 참조 설명서에서 (42 페이지)
페이지 인쇄
2. Locate a vacant PCI bus connector.
3. If using the SM56 Data/Fax/Speakerphone modem, connect the sound subsystem interface
cable(s) to the modem card (via the internal TAPI connector or using the audio jacks -- refer
to the information above on sound card compatibility.)
4. Connect the modem Line input to an analog phone jack using an RJ-11 phone cable.
Optionally, connect a telephone handset to the Phone input on the line interface card.
5. Replace the personal computer cover and power it back on.
6
Installing SM56 Software on Windows 95/98
Note: Windows 95/98 assigns the modem a COM port number. To support older software
applications and DOS games the SM56 installation software attempts to negotiate a COM port
number in the range of 1-4. If the install picks a higher COM port, you can force the COM port
selection via the Control Panel application after install is complete.
Installing on Windows 95/98
(Note: The Install Wizard may vary slightly with different versions of the OS and different
service packs)
On starting Windows for the first time after installing the SM56 line interface card, the Windows
Configuration Manager detects the new hardware, assigns resources to it, and then displays a
window requesting the modem software drivers. This indicates that the Configuration Manager is
looking for the information (INF) file, which contains information about the modem, including
device type (Modem), device driver information (the name of the driver that will control the
modem) and the AT command/response sets that it supports.