Motorola SURFboard SBV5322 설치 매뉴얼 - 페이지 14
{카테고리_이름} Motorola SURFboard SBV5322에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola SURFboard SBV5322 43 페이지. Modem de voz digital para 4 lineas
Motorola SURFboard SBV5322에 대해서도 마찬가지입니다: 데이터시트 (3 페이지), 빠른 시작 매뉴얼 (2 페이지), 안전 및 규제 정보 매뉴얼 (6 페이지), (설치 가이드 (43 페이지), (영어) 사용자 가이드 (43 페이지), (포르투갈어) 설치 가이드 (43 페이지)
페이지 인쇄
Introduction
Before You Begin
Verify that you have the items pictured below.
Item
Power adapter
or
or cable
10/100Base-T
Ethernet cable
Phone wire
Optional Items
The contents of your package may vary depending on the model.
Battery
You will need 75-ohm coaxial cable with F-type connectors to connect your digital voice
modem to the nearest cable outlet. If a TV is connected to the cable outlet, you may need a
1 GHz RF splitter and a total of three coaxial cables to connect both the TV and the digital
voice modem. Coaxial cables and RF splitters are available at consumer electronics stores. To
connect your digital voice modem to an Ethernet hub, see the network description in
"Cabling for Multiple Users" on page
Caution
This product is for indoor use only. Do not route the Ethernet or telephone cables
outside of the building. Exposure of the cables to lightning could create a safety
hazard and damage the product.
Description
Connects to the AC power outlet
Connects to the
Use Cat 5 or greater cable
Connects the telephone to the cable system to provide
telephone service
Provides standby power for your SBV5322. The SBV5322 has
the capability to accommodate two standby batteries. For
additional standby batteries, contact your service provider.
23. Check the documentation provided with your hub.
5 —
SBV5322 SURFboard Digital Voice Modem
Ethernet
port