Motorola VT2442 - VONAGE 빠른 설치 매뉴얼

{카테고리_이름} Motorola VT2442 - VONAGE에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola VT2442 - VONAGE 2 페이지. Software license, warranty, safety, and regulatory information voice gateway
Motorola VT2442 - VONAGE에 대해서도 마찬가지입니다: 사용자 설명서 (36 페이지), 매뉴얼 (4 페이지), 빠른 시작 매뉴얼 (12 페이지)

페이지 인쇄

What do I need?

To connect your VT2442, you need a broadband Internet connection and an

active Vonage account. If you purchased your VT2442 Voice Gateway from a

retail location, you must first activate your Vonage phone service. (You will

need to provide the WAN MAC ID on the bottom of the VT2442.)

In the US, visit www.vonage.com/activate.

In the UK, visit www.vonage.co.uk/activate.

What is included?

QUICK INSTALLATION GUIDE

Motorola VT2442 Voice Gateway

The device that will connect your phone to your broadband Internet connection.

This Quick Installation Guide has everything you

For information about the front panel lights, refer to the VT2442 User Guide on the

CD-ROM.

need to get your Vonage

Internet Phone Service

working with the Motorola VT2442 voice gateway.

Take a look at the equipment, follow the simple

instructions provided here, and in no time at all you'll

be part of the telephone revolution.

Power adapter

Welcome to

(Yours may look different.)

Which set of instructions should I follow?

Do you already have a router, or does your DSL or cable modem have a built-in router?

HINT: If you have more than one computer connected to a single Internet connection, you have a router. Some Internet service

providers supply combination modem/routers. Look on the back of your modem. If it has multiple Ethernet ports, it is a modem

with a built-in router. If you are not sure, call your cable or DSL provider.

If you answered yes to either question, follow instruction set A on the next page.

This guide contains enough information for most customers to begin using their Internet phone service.

Do you have a standard DSL or cable modem?

The VT2442 User Guide on the accompanying CD-ROM contains more detailed instructions and

troubleshooting information, as well as a glossary of relevant networking terms.

Follow instruction set B on page 5.

What will I be looking for?

Here's what you'll find on the rear of the

VT2442 Voice Gateway:

Phone ports

(to phone lines 1 and 2)

Internet port

(to your cable or DSL

modem)

Ethernet connectors

CD-ROM

(to your computers)

Reset button

Power connection

Ethernet cables

Telephone jack adapter

(1 blue and 1 yellow)

(UK only)

(The yellow cable is not

always needed.)

Installation with an Existing Router or Modem/Router

Internet

Cable or DSL modem

Existing router

VT2442

To AC power

Optional phone or fax machine

Computer for

for a second Vonage line

configuring the

VT2442

You must connect a phone to

the Phone 1 port

Shut down your computer. Unplug your modem power cord. Unplug your router power

cord. Disconnect the cable connecting one computer to the router. Leave your modem

connected to the cable or phone line that supplies your Internet connection.

Connect one end of the blue Ethernet cable to the Ethernet port on your router. Connect

the other end to the blue Internet port on the rear panel of the VT2442.

Connect one end of the yellow Ethernet cable to the yellow Ethernet 1 port on the rear

panel of the VT2442. Connect the other end to the Ethernet port on the computer you

disconnected in Step 1.

Plug your modem power cord into an unswitched AC power outlet.

IMPORTANT: Before you continue, be sure to allow enough time for your modem to complete its start-

up process. Refer to the information provided by the modem manufacturer.

Installation with an Existing Router or Modem/Router

(continued)

Plug your router power cord into an unswitched AC power outlet.

IMPORTANT: Before you continue, be sure to allow enough time for your router to complete its

start-up process. Refer to the instructions provided with the router.

Connect the adapter supplied with your VT2442 to the Power port on the rear panel of

the VT2442. Plug the other end into an unswitched AC power outlet.

Turn on the computer connected to the VT2442. The Ethernet 1 light on the VT2442

front panel should light. Open your Web browser and check your Internet connection

by visiting any website.

IMPORTANT: Before you continue, be sure the VT2442 Power, Ethernet 1, and Internet lights are

all on.

If your Internet connection works, skip to C "Connecting Your Telephone" on page 7 .

If your Internet connection does not work, see D "Troubleshooting" on page 8.