Epson TM-L90 series 사용자 설명서 - 페이지 13

{카테고리_이름} Epson TM-L90 series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson TM-L90 series 17 페이지. Attaching cover on the power switch
Epson TM-L90 series에 대해서도 마찬가지입니다: 브로셔 (1 페이지), 브로셔 (2 페이지), 사양 (2 페이지), 사양 (8 페이지), 정보 매뉴얼 (5 페이지), 사양 (4 페이지), 여기에서 시작 (2 페이지), 여기에서 시작 (2 페이지), 매뉴얼 (13 페이지), 사용 설명서 (12 페이지), 매뉴얼 (2 페이지)

페이지 인쇄

Cleaning the Platen Roller/Roll Paper End Sensor

When paper dust accumulates on the platen roller or the roll paper end sensor,

follow the steps below to clean them. To maintain good functional capabilities,

clean them regularly (every 6 months).

Turn off the printer, open the peeler cover, and then the roll paper cover.

Clean the platen roller and roll paper end sensor with a cotton swab lightly

moistened with water or an alcohol, as shown in the illustration.

Close the roll paper cover after the water or alcohol has dried.

Cleaning the Peeler Unit

After the peeler is used for a prolonged period of time, the glue from the labels

accumulates on the rollers of the peeler unit. If you leave the rollers in such a

condition, the glue may stick to issued labels, or a paper jam may occur. To

prevent malfunctions and maintain good print quality, clean the rollers regularly

(every 100,000 labels).

You can clean them easily if you use a wasted label, as shown in the illustration.

Note:

Do not use any alcohol based solvents for cleaning. Such solvents may enter the roller shaft

and cause a malfunction of the peeler.

TM-L90 with Peeler User's Manual 9

English