Epson U590P - TM B/W Dot-matrix Printer 사용자 설명서 - 페이지 7

{카테고리_이름} Epson U590P - TM B/W Dot-matrix Printer에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson U590P - TM B/W Dot-matrix Printer 11 페이지. User manual

4. Turn the cassette knob on the

cartridge in the direction of the

arrow 2 or 3 times to remove

any slack.

5. Insert the ribbon, and rotate the

cassette knob 2 or 3 more times,

as shown in illustration 3 .

6. Make sure the ribbon has no

wrinkles or creases and is installed below the print head as

shown on the label inside the printer.

Inserting Slip Paper

Note:

Use only slip paper that matches the specification.

Do not use wrinkled or curled paper.

1. When the SLIP LED flashes, insert slip

paper, using the right edge of the slip

paper inlet as a guide (see illustration 4 ).

2. When you insert the slip into the inlet as

far as it will go, the sensor detects the

slip, the SLIP LED changes from flashing

to on, and the printer draws the paper in

and prints it.

3. After printing is complete, the SLIP LED goes off, and you can

remove the slip.

No lights on the control panel

Check that power supply cables are plugged into the printer, the

power unit, and power outlet correctly.

The printer sounds like it is printing, but nothing is printing

Check that the ribbon cassette is installed correctly.

Replace the ribbon cassette.

TM-U590/TM-U590P User's Manual 7

English