Epson 1810p - PowerLite XGA LCD Projector 제품 지원 게시판 - 페이지 3

{카테고리_이름} Epson 1810p - PowerLite XGA LCD Projector에 대한 제품 지원 게시판을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson 1810p - PowerLite XGA LCD Projector 5 페이지. Release of emp ns connection for windows & mac upgrade from v2.50 to v2.51
Epson 1810p - PowerLite XGA LCD Projector에 대해서도 마찬가지입니다: 사용자 설명서 (42 페이지), 빠른 설정 (2 페이지), 운영 매뉴얼 (47 페이지), 사용자 설명서 (27 페이지), 적합성 선언 (4 페이지), 부품 목록 (1 페이지), 브로셔 (2 페이지), 제품 지원 게시판 (41 페이지)

페이지 인쇄
Epson 1810p - PowerLite XGA LCD Projector 제품 지원 게시판
Limitations
When the PowerLite1725 / 1735W exhibit a Lamp Cover Open error state,
EMP Monitor cannot detect the error. The reason is that when the lamp
cover is opened, the primary power source that reports the error state to
EMP Monitor is turned off immediately. This is different from other models
which make the secondary power source turn off under the same condition.
Note: EMP Monitor Ver. 4.xx is not compatible with EMP Monitor Ver. 3.05 and earlier
versions. EMP Monitor Ver. 4.xx cannot read the setting files of EMP Monitor Ver. 3.05
and earlier versions.
System Requirements:
OS
CPU
Memory
Available hard disk
space
Display
Obtaining the Update:
Download epson13055.exe from
Monitor. The files are extracted and copied to C:\EPSON\epson13055_emp_monitor_430.
This file is a self-extracting archive and will start the installation utility for EMP Monitor. Follow
the on-screen instructions during the installation process.
•
Windows 98 SE / Me / NT 4.0 (SP6) *Except Arabic and
Hebrew / Windows 2000 Pro / XP Home Edition / XP
Professional (32 bit) / Vista Home Basic / Home Premium /
Ultimate / Business / Enterprise (32 bit) *Except Ukrainian /
Vista SP1 Home Basic / Home Premium / Ultimate /
Business / Enterprise (32 bit)
•
Internet Explorer Ver. 5.0 or later must be installed
Minimum: Pentium MMX 166 MHz (Recommended: Pentium II
233 MHz or higher)
At least 64 MB (Recommended: 128 MB or above)
At least 50 MB
SVGA (800×600) or higher resolution, 32 bit or higher display
color
www.epson.com
Page 3 of 4
PSB.2009.06.001
to get the version 4.30 update for EMP