Epson 2450 - Perfection Photo Scanner 제품 정보 - 페이지 5

{카테고리_이름} Epson 2450 - Perfection Photo Scanner에 대한 제품 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson 2450 - Perfection Photo Scanner 5 페이지. Product support bulletin(s)
Epson 2450 - Perfection Photo Scanner에 대해서도 마찬가지입니다: 사용자 설명서 (7 페이지), 제품 지원 게시판 (34 페이지), 여기에서 시작 (2 페이지), 사양 (2 페이지), 매뉴얼 (11 페이지), 제품 지원 게시판 (40 페이지), 제품 지원 게시판 (17 페이지), 적합성 선언 (2 페이지), 제품 지원 게시판 (14 페이지), 제품 지원 게시판 (18 페이지), 제품 지원 게시판 (36 페이지)

페이지 인쇄

Epson 2450 - Perfection Photo Scanner 제품 정보

Selecting TWAIN Settings

If you need to manually adjust

the settings in EPSON

TWAIN, follow the guidelines

shown at right. The illustration

shows the preferred order in

which settings should be

adjusted. Detailed descriptions

are given in the electronic

Reference Guide.

The most important

thing to remember

when scanning is to

select the correct

image type and

resolution for your

scan.

Indicator Light

The indicator light (next to the ] Start button) indicates the

status of the scanner, as described below.

Light

Color

Status

Green

The scanner is ready to scan images.

Flashing

Green

The scanner is initializing (warming up) or is

busy scanning.

Flashing

Red

Check the following, then turn your

scanner off and back on to reset it:

❏

If this does not eliminate the error, the

fluorescent lamp may need to be replaced

or the scanner may have another problem.

Consult your dealer or EPSON.

Off

—

The scanner is unplugged or turned off.

1 Select basic settings:

Document Source

Image Type

Destination

Resolution

2 Preview your image

Make sure the transportation lock is

turned to the unlocked position. See

the Start Here sheet for details.

Make sure the scanner is properly

connected to your computer.

If you are scanning transparencies,

make sure you've removed the

reflective document mat.

Epson 2450 - Perfection Photo Scanner 제품 정보 - 페이지 5

Selecting TWAIN Settings

Indicator Light

Related Documentation