Epson 3170 - Perfection Photo 문제 해결 매뉴얼 - 페이지 8

{카테고리_이름} Epson 3170 - Perfection Photo에 대한 문제 해결 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson 3170 - Perfection Photo 12 페이지. Scanning tips and troubleshooting guide
Epson 3170 - Perfection Photo에 대해서도 마찬가지입니다: 제품 지원 게시판 (34 페이지), 사용자 설명서 (6 페이지), 여기에서 시작 (4 페이지), 제품 지원 게시판 (23 페이지), 매뉴얼 (11 페이지), 제품 지원 게시판 (40 페이지), 제품 지원 게시판 (17 페이지), 제품 지원 게시판 (24 페이지), 제품 지원 게시판 (29 페이지), 제품 지원 게시판 (8 페이지), 중요 안전 지침 (4 페이지), 제품 지원 게시판 (3 페이지), 제품 지원 게시판 (14 페이지), 제품 지원 게시판 (18 페이지), 제품 지원 게시판 (12 페이지), 제품 지원 게시판 (40 페이지), 제품 지원 게시판 (40 페이지), 제품 지원 게시판 (22 페이지), 제품 지원 게시판 (12 페이지), 제품 지원 게시판 (21 페이지)

페이지 인쇄
Epson 3170 - Perfection Photo 문제 해결 매뉴얼
•
Change the Display Gamma setting of the scanned image for your output device, such as a
monitor or printer, in the Configuration dialog box in EPSON Scan.
•
Select Unsharp Mask Filter in the Professional Mode main window. If moiré patterns
appear in the image, see
for more information.
•
Select Color Control and check Continuous auto exposure in the Configuration dialog
box, or adjust the Exposure setting using the
Mode main window.
•
Change the Resolution setting for your document.
•
If this happens on part of the image, make sure the document is uniformly flat against the
document table. A document that is wrinkled or warped may not scan well.
Caution: Do not place heavy objects on the document table.

Colors are patchy or distorted at the edges of the image

Try one or more of the following solutions.
•
A document that is very thick or warped at the edges can cause discoloration. Cover the
edges of the document with paper to block external light.
•
Make sure the document is flat against the document table.
•
Adjust your software's Gamma setting using the Histogram Adjustment dialog box in
Professional Mode in EPSON Scan.

The image is dark

Try one or more of the following solutions.
•
Check your software's Brightness setting using the Image Adjustment dialog box in Home
Mode, or the Histogram Adjustment dialog box and the Image Adjustment dialog box in
Professional Mode.
•
Check the brightness and contrast settings of your computer display.
•
Select Color Control and also select Continuous auto exposure in the Configuration
dialog box, or adjust the Exposure setting using the
Professional Mode main window.
•
Change the Display Gamma setting of the scanned image for your output device, such as
monitor or printer, in the Configuration dialog box in EPSON Scan.
•
Change the Destination setting in the Home Mode or Professional Mode main window.
•
In Home Mode, select Screen/Web as the Destination setting. Selecting a printer may
cause on-screen colors to be different from the colors of the original; however, the colors
will be reproduced correctly when the image is printed.
Moiré (cross-hatch) patterns appear in the scanned image
Auto Exposure button in the Professional
Auto Exposure button in the
below