Epson Stylus Pro 7800 and 9800
Control Panel Menus
Boldface indicates the default setting. Press the
button to access the menus and the arrow buttons to navigate.
Menu
Item
PRINTER SETUP
ROLL PAPER COUNTER
ROLL PAPER LENGTH
ROLL LENGTH ALERT
PLATEN GAP
PAGE LINE
INTERFACE
CODE PAGE
ROLL PAPER MARGIN
PAPER SIZE CHECK
PAPER SKEW CHECK
TIME OUT
CUTTER ADJUSTMENT
REFRESH MARGIN
AUTO NOZZLE CHECK
AUTO CLEANING
QUIET CUT
INITIALIZE SETTINGS
TEST PRINT
NOZZLE CHECK
STATUS CHECK
JOB INFORMATION
CUSTOM PAPER
PRINTER
VERSION
STATUS
PRINTABLE PAGES
INK LEVEL
MAINTENANCE TANK
USAGE COUNT
CLEAR USAGE COUNT
4 - Epson Stylus Pro 7800 and 9800
r
Menu
Settings/Explanation
Available only if
REMAINING PPR
SETUP is enabled in
Maintenance Mode
STANDARD, NARROW,
WIDE, WIDER, WIDEST
ON, OFF
AUTO, USB, IEEE 1394,
OPTIONAL I/F CARD
PC437, PC850
DEFAULT,
TOP/BOTTOM15mm,
TOP 35/BOTTOM15mm,
15mm, 3mm
ON, OFF
ON, OFF
OFF, 30sec, 60sec,
180sec, 300sec
EXECUTE
ON, OFF
ON, OFF
ON, OFF
ON, OFF
Restores default
settings
Shows clogged nozzles
Ink and paper remaining
and status of parts
Ink and paper used for
the last 10 jobs
Registered paper
configuration
information
Current firmware version
For the ink remaining in
each cartridge
E*****F for each color
E*****F
Ink in milliliters, paper in
square centimeters
EXECUTE
8/05
Menu
Item
PRINTER
JOB HISTORY
STATUS
(continued)
TOTAL PRINTS
SERVICE LIFE
CUSTOM PAPER
PAPER NUMBER
PLATEN GAP
THICKNESS PATTERN
THICKNESS NUMBER
CUT METHOD
PAPER FEED ADJUST
DRYING TIME
PAPER SUCTION
M/W ADJUSTMENT
MAINTENANCE
CUTTER
REPLACEMENT
BK INK CHANGE
POWER CLEANING
CLOCK SETTING
CONTRAST
ADJUSTMENT
HEAD
PAPER THICKNESS
ALIGNMENT
ALIGNMENT
AUTO
MANUAL
Settings/Explanation
Ink used in milliliters,
and paper in square
centimeters, for each
saved job
Number of pages printed
E*****F for CUTTER,
CR MOTOR (carriage)
PF MOTOR (paper feed)
HEAD UNIT (print head)
CLEANING UNIT
PRESSURE MOTOR
STANDARD,
NO. (1 to 10)
STANDARD, NARROW,
WIDE, WIDER
PRINT
1 to 15
STANDARD,
THIN PAPER, THICK
PAPER FAST, THICK
PAPER SLOW
–0.70% to 0.70%
0. 0 sec. to 10.0 sec.
STANDARD, –1, –2, –3,
–4
STANDARD, 1, 2
EXECUTE
EXECUTE
EXECUTE
EXECUTE
–20 to +20
STANDARD, 0.1 mm to
1.5 mm
UNI-D, BI-D 2-COLOR,
BI-D ALL, BI-D #1,
BI-D #2, BI-D #3
UNI-D, BI-D 2-COLOR,
BI-D ALL
페이지 인쇄