Epson 7900p - PowerLite XGA LCD Projector 제품 정보 - 페이지 16

{카테고리_이름} Epson 7900p - PowerLite XGA LCD Projector에 대한 제품 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson 7900p - PowerLite XGA LCD Projector 24 페이지. Supplemental / late breaking information
Epson 7900p - PowerLite XGA LCD Projector에 대해서도 마찬가지입니다: 사용자 설명서 (42 페이지), 운영 매뉴얼 (36 페이지), 교체 부품 (1 페이지), 빠른 설정 (2 페이지), 사용자 설명서 (1 페이지), 기술 요약 (7 페이지), 제품 지원 게시판 (7 페이지), 렌즈 설치 (5 페이지)

페이지 인쇄
Epson 7900p - PowerLite XGA LCD Projector 제품 정보
Epson PowerLite 7900p Projector
Registering Projectors in EMP Monitor
Before you can monitor a projector, you have to register it.
Follow these steps:
1. Open EMP Monitor. You see this screen:
Click here
2. Click
Register projector
3. Click
to locate projectors currently operating
Auto detect
on the network. Or click
the projector's name and network address.
Note: If Auto detect fails to find the projector, your projector
may not be connected or configured correctly for the network.
Any projectors found on the network are listed:
4. Select each projector you want to add by clicking its name
and clicking
. When you're done, click
Add
16
Epson PowerLite 7900p Projector
-
. You see this screen:
Click here
and enter
Manual registration
Click here
.
Close
You see this screen listing all registered projectors:
Note: To delete a projector from the list, highlight the
projector name, and click
5. Click
. You see the status of each of your registered
Close
projectors on the main EMP Monitor screen:

Monitoring Your Projectors

The EMP Monitor screen lets you monitor your projectors
using the Status, Video Source, and Error icons shown below.
This lets you see which projectors are currently being used,
from which source (or port) they are projecting an image, and
if a problem occurs.
Status icon
Video Source icon
Note: To monitor a projector when it's in standby mode (plugged
in but not projecting), you must first select
setting in the projector's Advanced1 menu. You
Standby Mode
can monitor up to 64 projectors.
For detailed status information, select the projector and click
.
View details
9/04
.
Delete
Error icon
as the
Network ON