Philips 14PV385 사용 설명서 - 페이지 12

{카테고리_이름} Philips 14PV385에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Philips 14PV385 20 페이지. 36 cm (14") tv - vcr combi with turbo drive
Philips 14PV385에 대해서도 마찬가지입니다: 기술 사양 (2 페이지), 사용자 설명서 (17 페이지), 사양 (2 페이지)

페이지 인쇄
Philips 14PV385 사용 설명서
How can I set the counter to '0:00:00'?
You can set the counter to '0:00:00' with
CLEAR
. When you put a cassette in the TV-
Video Combi, the counter will automatically
reset to '0:00:00'.
The counter does not move
This occurs when there are no recordings on a
portion of a tape. This is not a fault in your TV-
Video Combi.
The screen shows '-0:01:20'
If you rewind a cassette from the tape position
'0:00:00', the counter will show for instance,
'-0:01:20' (the cassette was rewound to 1
minute and 20 seconds before '0:00:00').
'-:--' is displayed in the 'REM' counter
This counter will automatically recognise the
length of the tape. In addition, when you put in
a cassette, the TV-Video Combi will first calcu-
late the time played back. Therefore, '-:--'
appears first and only after the tape has been
running for a few seconds, the correct remain-
ing time will be shown.
Searching for a tape position with
picture (scanning)
1.
1.
During playback, press
or
(forward).
FWD 1- B
2.
2.
If you want to search in super high speed,
press
REW0- s
(This function will not operate for a cassette
recorded in SP mode in the NTSC standard.)
3.
3.
Press
to resume playback.
PLAY B-K

Still picture

1.
1.
During playback, press
tape and display a still picture.
2.
2.
Press
to resume playback.
PLAY B-K
Scanning and Still picture interfere with the pic-
ture quality. The sound is switched off. This is not
a fault in your TV-Video Combi.
Searching for tape position without
picture (forward wind and rewind)
1.
1.
Stop the tape with
2.
2.
Press
REW0- s
(forward).
3.
3.
To stop the tape, press
(reverse)
REW0- s
or
once more.
FWD 1- B
to stop the
STILL
2
.
STOP C-L
(reverse) or
FWD 1- B
.
STOP C-L

Index search

Every time a tape is recorded, an index marking
is written on the tape.
These marked positions can be found again
quickly and easily later.
1.
1.
To search for the previous marking, press
and then
INDEX 3
3
2.
2.
For the next marking, press
then
FWD 1- B
3.
3.
As soon as the TV-Video Combi finds this
marking, it automatically switches to play-
back.

Manual tracking

To manually adjust the tracking during playback,
press
PROG P +
PROG P –
Tracking will return to Automatic Tracking
Adjustment when you press
, or insert a tape.
PLAY
B-K
To remove vertical jitter in a Still picture, press
P +
P–
.
10
.
REW0- s
INDEX 3
3
.
P +
or
.
P–
and
STOP C-L
and
EN