Philips 19PFL2507 사용자 설명서 - 페이지 7

{카테고리_이름} Philips 19PFL2507에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Philips 19PFL2507 14 페이지.
Philips 19PFL2507에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (9 페이지)

페이지 인쇄
Philips 19PFL2507 사용자 설명서

4 Use your TV

Watching channels from an external
device
1
Turn On a set-top box or the connected device.
•
The picture from your set-top box or the connected device
might appear automatically on the TV screen.
If the picture does not appear
Press SOURCE repeatedly to select the set-top box or
the connected device and wait a few seconds till the
picture appears.
2
Use the remote control of the set-top box or the
connected device to select channels to view.

Switching audio mode

Digital TV operation
1
Press SAP to display the currently
P
selected language and the number of
available languages.
2
Press SAP repeatedly to cycle through the available
P
audio languages.
Note
•
Available languages differ depending on the broadcast.
•
Other is displayed when the audio language cannot be acquired
r
or the acquired languages are other than English, French or
Spanish.
Analog/Cable TV operation
1
Press SAP to display the currently selected audio mode.
P
2
While receiving an MTS broadcast, press
repeatedly to cycle through the available
audio channels.

Changing picture and sound settings

You must set Home in Location (refer to page 10).
Otherwise, personalized picture and sound settings will not
be memorized after the unit goes into Standby mode.
Changing picture settings
1
Press MENU and use ▲▼ to select Picture, then press
OK.
Picture
Sound
Setup
Features
Language
USB
2
Use ▲▼
then press OK.
Settings assistant to guide you through the best picture setting
11.1
English 1/3
Auto picture
Backlight
Contrast
Brightness
Color
Tint
Sharpness
Advanced settings
11
SAP
/ STEREO
7
Settings assistant
Auto picture
Backlight
Contrast
Brightness
Color
Tint
Sharpness
Advanced settings
to select the item you want to adjust,
◄►
to select the desired setting, then press OK
(Personal, Standard, Vivid, Sports, Movie,
Game and Eco)
Cursor ◄
to reduce power
consumption
to decrease contrast
to decrease
brightness
to decrease color
intensity
to add red
to soften
to select the desired setting, then press OK
(Color alignment, Noise reduction,
Black stretch, Dynamic contrast and
Personal
18
50
30
30
0
2
Cursor ►
to set the backlight
brighter
to increase contrast
to increase brightness
to increase color
intensity
to add green
to sharpen
t
Gamma)