Epson 830p - PowerLite XGA LCD Projector 운영 매뉴얼 - 페이지 34

{카테고리_이름} Epson 830p - PowerLite XGA LCD Projector에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson 830p - PowerLite XGA LCD Projector 36 페이지. Release of emp ns connection for windows & mac upgrade from v2.50 to v2.51
Epson 830p - PowerLite XGA LCD Projector에 대해서도 마찬가지입니다: 사용자 설명서 (42 페이지), 운영 매뉴얼 (47 페이지), 빠른 설정 (2 페이지), 보충 설명서 (1 페이지), 사용자 설명서 (15 페이지), 브로셔 및 사양 (4 페이지), 설치 매뉴얼 (19 페이지), 기술 요약 (7 페이지), 기능 설명서 (5 페이지), 제품 지원 게시판 (25 페이지), 제품 지원 게시판 (22 페이지), 제품 지원 게시판 (28 페이지), 제품 지원 게시판 (41 페이지), 제품 지원 게시판 (15 페이지), 제품 지원 게시판 (22 페이지), 사양 시트 (4 페이지)

Application lock function

You can use the application lock to prevent third parties from operating the

projectors using EMP Monitor and from changing settings without authority.

Opening and closing EMP Monitor and status monitoring can still be carried

out even when the application lock is applied.

In addition, when a password has been set, the password must be entered in

order to cancel the application lock. This ensures that the application lock can

not be easily cancelled, and thus improves system security.

Switching application lock between enabled and

disabled

PROCEDURE

Select "Application lock" from the "Tool" menu.

The application lock will be enabled and no operations will be

possible other than opening and closing EMP Monitor and disabling

the application lock.

PROCEDURE

Select "Application unlock" from the "Tool" menu.

The password entry window will be displayed, so

enter the set password and then click [OK].

If no password has been set (default setting), click [OK]

without entering a password. It is recommended that you enter a

password in order to strengthen security.

The application lock will be cancelled and operations can be

carried out as normal.

Carry out the following operations while application lock is cancelled.

PROCEDURE

Select "Environment setup" from the "Tool" menu.

The "Environment setup" window will be displayed.

Select "Change the application lock password".

Enter the password in both the "New password" and

"New password (confirm)" boxes and then click [OK].

The password can be up to 16 bytes in length. Single-byte

alphanumeric characters can be used.