Philips 19PFL4322 사용자 설명서 - 페이지 11

{카테고리_이름} Philips 19PFL4322에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Philips 19PFL4322 20 페이지. Widescreen flat tv with crystal clear iii lcd hd ready
Philips 19PFL4322에 대해서도 마찬가지입니다: 사용자 설명서 (2 페이지), 사양 (2 페이지), 패키지 내용물 (2 페이지), 빠른 시작 매뉴얼 (2 페이지), 브로셔 및 사양 (3 페이지)

페이지 인쇄

Installing your television set

POWER

PROGRAM

19PFL4322

20PFL4122

15PFL4122

VOLUME

Positioning the television set

Place your TV on a solid stable surface. To avoid

danger do not expose the TV to water, or a heat

source (e.g. lamp, candle, radiator). Do not obstruct

the ventilation grid at the rear.

Connecting the aerials

• Insert the aerial plug into the

rear of the set.

• Connect the power lead to the television and the

mains plug into the wall socket (220-240 V/50 Hz).

For connecting other appliances see page p.13.

Switching on

To switch on the set, press the POWER key. A blue

indicator comes on and the screen lights up. Go

straight to the Quick Installation chapter. If the TV

remains in standby mode (red indicator), press the

P -/+key on the remote control. The indicator will

ﬂ ash when you use the remote control.

Note-Quick installation

ATS (Automatic Tuning System) feature

If the transmitter or cable network sends the

automatic sort signal, the programmes are

numbered correctly. In this case, the installation is

complete. If this is not the case, you can use the

Channel setting menu to number the

programmes correctly.

ACI (Automatic Channel Installation)

feature

If a cable system or a TV channel which broadcasts

ACI is detected, a programme list appears.

Without ACI broadcast, the channels are

numbered according to your language and country

selection. You can use the Channel setting menu

to re-number them.

socket at the