Epson 835p - PowerLite XGA LCD Projector 제품 정보 - 페이지 4

{카테고리_이름} Epson 835p - PowerLite XGA LCD Projector에 대한 제품 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson 835p - PowerLite XGA LCD Projector 21 페이지. Release of check tool for network projectors v1.00 for windows
Epson 835p - PowerLite XGA LCD Projector에 대해서도 마찬가지입니다: 사용자 설명서 (42 페이지), 운영 매뉴얼 (36 페이지), 빠른 설정 (4 페이지), 운영 매뉴얼 (47 페이지), 제품 지원 게시판 (30 페이지), 보충 설명서 (1 페이지), 브로셔 및 사양 (4 페이지), 설치 매뉴얼 (19 페이지), 사용자 설명서 (1 페이지), 기술 요약 (7 페이지), 기능 설명서 (5 페이지), 제품 지원 게시판 (25 페이지), 제품 지원 게시판 (38 페이지), 제품 지원 게시판 (12 페이지), 제품 지원 게시판 (42 페이지), 제품 지원 게시판 (22 페이지), 제품 지원 게시판 (28 페이지), 제품 지원 게시판 (41 페이지), 제품 지원 게시판 (34 페이지), 제품 지원 게시판 (38 페이지), 제품 지원 게시판 (28 페이지), 제품 지원 게시판 (15 페이지), 제품 지원 게시판 (22 페이지), 사양 시트 (4 페이지)

Epson 835p - PowerLite XGA LCD Projector 제품 정보
Epson PowerLite 835p
Playing Sound Through the Projector
You can play sound through the projector's speaker system or
attach an external speaker system.
To play sound through the projector, use one of the following
cables that came with your projector:
If you have a computer or video equipment connected to
one of the
Computer/Component
jack cable. Connect one end to the correct Audio port and
the other end to the audio-output connector on your
equipment.
If you have a computer or video equipment connected to
the
or
port, use an RCA-style audio cable.
Video
S-Video
Connect one end to the correct port and the other end to
the audio-output connector on your equipment.
Use with Computer or
Component connection
To connect external speakers, use the
back of the projector. You may be able to use a commercially
available audio cable with a stereo mini-jack connector on one
end and pin jacks on the other, or you may have to purchase a
special cable or use an adapter, depending on your stereo
system. See the User's Guide for more information.
Using the Remote Control as a Wireless
Mouse
If you've connected a computer to the projector, you can
use the projector's remote control as a wireless mouse by
connecting the USB cable that came with the projector to
the projector's
USB port. The wireless mouse function
Type B
is supported on systems with a USB port running Windows
98, 2000, Me, or XP, Macintosh OS 8.6 to 9.x, or Macintosh
OS X 10.2 or later. See the User's Guide for more information.
4
Epson PowerLite 835p
-
ports, use a stereo mini-
Use with
Use with
Video
S-Video
connection
connection
port on the
Audio Out

Starting Up the Projector

If you turn on your computer or video equipment before the
projector, the projector automatically selects the connected
source. If you turn on the projector first or you have multiple
sources connected, you may have to switch to the desired
source manually (see "Selecting the Image Source" below).
Turning On the Projector
1. Remove the lens cap.
2. Plug in the projector.
3. Wait a few seconds until the projector's
flashing and turns orange.
4. Press the red P
the remote control.
Note: If you're using the remote
control, make sure batteries are
installed and the power switch on
the side of the remote control is
turned on.
The projector's
and an image begins to appear after about 30 seconds.
When the
Power
the projector is ready for use.
Warning: Never look into the lens when the lamp is on. This
can damage your eyes.
5. If you've connected a Windows-based computer to the
projector, you may see a New Hardware Wizard telling you
that your computer has found a plug-and-play monitor; if
so, click
Cancel
Selecting the Image Source
If multiple devices are connected to the projector, you can use
the
buttons on the projector or the remote control to
Source
®
switch from one source to another:
You can press the
control panel or the remote to find the connected
equipment automatically.
10/04
Power
button on top of the projector or on
Power
light flashes green as it warms up,
Power
light stops flashing and remains green,
.
button on the projector's
Source Search
light stops
Power button