Epson 9800 - Stylus Pro Color Inkjet Printer 포장 풀기 및 설정 매뉴얼 - 페이지 11

{카테고리_이름} Epson 9800 - Stylus Pro Color Inkjet Printer에 대한 포장 풀기 및 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson 9800 - Stylus Pro Color Inkjet Printer 27 페이지. Stylus pro 800 series
Epson 9800 - Stylus Pro Color Inkjet Printer에 대해서도 마찬가지입니다: 브로셔 및 사양 (8 페이지), 시작하기 매뉴얼 (10 페이지), 사용자 설명서 (11 페이지), 빠른 참조 매뉴얼 (12 페이지), 제한 보증 (12 페이지), 브로셔 및 사양 (8 페이지), 브로셔 및 사양 (6 페이지), 브로셔 및 사양 (16 페이지), 공지 사항 시트 (4 페이지)

Epson 9800 - Stylus Pro Color Inkjet Printer 포장 풀기 및 설정 매뉴얼
Note:
Set five paper feed support films at even intervals
in the order shown in the figure.
a
10. Set 5 paper guides at the bottom of the printer
as shown below, when you feed the paper
forward or backward.
Note:
❏ When you feed the paper forward with the Auto
Take-up Reel Unit, use the paper guides packaged
with the Auto Take-up Reel Unit.
If you want to feed the paper backward with the
Auto Take-up Reel Unit, remove the paper guides.
❏ If the printer is not used or if you want to move the
printer, insert the upper basket hooks. Make sure
the lower shafts are in the upward position, and
hook the basket rings on the upper basket hooks as
shown below.
b
Reusing the Packaging
If you need to transport your printer a long
distance, the printer should be repacked using the
original boxes and packing materials. Contact
your dealer for assistance.

Unpacking and Assembling

EPSON Stylus Pro 7800/7400

Choosing a Place for the Printer
❏ Leave adequate room for easy operation,
maintenance, and ventilation as shown below.
(Values in the illustration below are the
minimum.)
❏ Leave at least 20 cm between the back of the
printer and the wall.
11