Epson ActionNote 866C 사용자 설명서 - 페이지 34
{카테고리_이름} Epson ActionNote 866C에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson ActionNote 866C 47 페이지. Product support bulletin(s)
Epson ActionNote 866C에 대해서도 마찬가지입니다: 제품 정보 매뉴얼 (11 페이지), 제품 지원 게시판 (3 페이지), 프로그래밍 지침 (1 페이지)
페이지 인쇄
Fax/modem card configuration options
Option
COM Port Order*
COM Port Assignment
Order*
COM Port Definition*
Enable Audio
Enable Ring Indicate**
* Do not change the displayed values for COM ports and IRQs unless you
have a specific reason.
** This feature is not supported by all modem or fax/modem cards.
3-4
Using CardSoft
Function
Defines the order in which ports are selected for
configuring modem or fax/modem cards. You
may need to change the order for the COM
ports if you need to reserve a particular port for
another device (such as a mouse).
Determines whether COM ports are assigned
based on the order in which cards are inserted
or based on the PCMCIA slot into which they
are inserted. A bullet next to the option identifies
the selected order.
Determines which addresses and IRQs are used
for each COM port. If you change the IRQs,
make sure you assign a value listed as available
by the CSALLOC utility. (See page 3-9.)
Determines whether you can hear the sounds
produced when the modem (or fax/modem) is
connecting to a remote device.
Controls whether the system activates from a
suspend mode when receiving a modem or fax
call. When enabled, the system receives the call
even if it is in suspend mode. If this option is not
enabled, the system ignores the call.