Epson ActionNote 880C 제품 정보 매뉴얼 - 페이지 10

{카테고리_이름} Epson ActionNote 880C에 대한 제품 정보 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson ActionNote 880C 11 페이지. Product support bulletin(s)
Epson ActionNote 880C에 대해서도 마찬가지입니다: 사용자 설명서 (17 페이지), 사용자 설명서 (47 페이지), 제품 지원 게시판 (3 페이지), 프로그래밍 지침 (1 페이지)

페이지 인쇄

EPSON ActionNote 800 Series

System I/O Address Map

Installation/Support Tips

Using Low Battery Save to HDD and Instant On

the factory so that these options can be used. A 25MB area

is set aside for the saved data; this ensures that there is

enough space for all memory configurations.

located in the C:\ PM directory. Type the following

command at the DOS prompt and press

PHDISK/CREATE

AN800-10

Enter:

12/9/94

Low Battery Save to HDD or Instant On options, you need

to leave sufficient space on the disk unpartitioned. The

amount of space should equal the system memory plus

2MB. After you run FDISK to partition the drive, you need

to run the PHDISK utility to configure the storage space

on the drive.

Battery Save to HDD or Instant On options, the PCMCIA

services are not reinitialized. The computer recognizes

SRAM PC cards, but does not recognize most other PC

cards. You must reboot to reinitialize the services.

Using an External Monitor

When you connect an external monitor, make sure you turn it

on before you turn on the computer. The ActionNote

automatically detects the external monitor and displays data

on its screen. Press Fn F10 to switch your display from the

monitor to the LCD screen or to display on both screens

simultaneously.

Using a Serial Mouse

If you connect a serial mouse, you must use the Setup

program to disable the built-in trackpad.

Information Reference List

Engineering Change Notices

None

Technical Information Bulletins

None

Product Support bulletins

None