Epson BrightLink 455Wi 여기에서 시작하기 매뉴얼 - 페이지 5

{카테고리_이름} Epson BrightLink 455Wi에 대한 여기에서 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson BrightLink 455Wi 6 페이지. Remote control information
Epson BrightLink 455Wi에 대해서도 마찬가지입니다: 브로셔 및 사양 (20 페이지), 운영 매뉴얼 (47 페이지), 사용자 설명서 (8 페이지), 사용자 설명서 (7 페이지), 제품 지원 게시판 (5 페이지), 마운팅 템플릿 (5 페이지), 사용자 설명서 (25 페이지), 브로셔 및 사양 (6 페이지), 설치 핸드북 (10 페이지)

Calibrate Your System

Calibration coordinates the positioning of the pen with

the location of your cursor. You can use either pen, and

you only have to calibrate once.

Do one of the following:

•

Windows: click the

tray on your taskbar (lower right corner of

your screen), then select Calibrate (Normal).

•

Mac OS X: click the

select Calibration from the menu bar at

the top of the screen, then select Calibrate

(Normal).

Note: If the pen icon appears with a red X

you won't be able to calibrate. Make sure the

projector is powered on and the USB cable is

connected to your computer.

After you read the following message, click OK.

Note: Advanced calibration is recommended

only if you are projecting highly detailed images.

pen icon in the system

pen icon in the Dock,

Wait a few moments for the ﬂ ashing green circle

to appear. Use the interactive pen to touch each

ﬂ ashing green circle as it appears. Continue until

all the circles stop ﬂ ashing and turn black.

•

Touch the center of each circle, and make

sure you are not casting a shadow on the

pen.

•

If you make a mistake, or if too many circles

appear at the same time, press Esc on your

computer keyboard and restart calibration.

Tip: You only need to recalibrate if you change

computers, or if you notice that the pen position

is no longer the same as your cursor.

Congratulations! When you ﬁ nish calibration, you're

ready to explore your software options, as described

on the next page.