Epson C11C546011-N - Stylus Photo R200 여기에서 시작하기 매뉴얼 - 페이지 6
{카테고리_이름} Epson C11C546011-N - Stylus Photo R200에 대한 여기에서 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson C11C546011-N - Stylus Photo R200 9 페이지. User manual (p.i.m plug-in)
Epson C11C546011-N - Stylus Photo R200에 대해서도 마찬가지입니다: 사용자 설명서 (12 페이지), 보충 설명서 (1 페이지), 사용자 설명서 (12 페이지)
페이지 인쇄
6
Click CD-ROM drive, then click Next. Make sure Specify a location
is not checked.
7
At the next screen, click Next. Installation proceeds automatically.
8
When installation halts, click Finish.
9
You see the license agreement. Read the agreement and click Agree.
You see the Options Menu. Continue with the instructions below
to complete the software installation.
Finishing Windows Installation
1
Make sure you have paper loaded in the printer. Then click Print a
Test Page to check that your printer is set up correctly.
2
Click Install Optional Software. You see this screen:
3
Click the option for the software you want to install, then follow the
instructions on the screen to install it on your computer.
Note: At the end of Film Factory installation, deselect the option to
launch Film Factory.
4
When you're finished, click the Back button, then click Install
Printer Manual.
Note: You need a browser—such as Microsoft
or later or Netscape Navigator
5
When you're finished, click Exit.
6
When you see the EPSON Product Registration screen, register your
printer as instructed, then remove the EPSON CD.
You're ready to print! See your Printer Basics book for details.
Macintosh
Follow the steps below to install the software on your Macintosh.
1
Make sure your printer is connected and turned on. Then turn on
your Macintosh.
2
Put the EPSON CD in your CD-ROM or DVD drive and wait a few
seconds for the CD to be recognized.
3
If the CD-ROM window doesn't open automatically, double-click the
SPR200 CD-ROM icon. Then double-click
4
You see the license agreement. Read the agreement and click Agree.
®
®
®
4.0 or later—to view the manual.
EPSON.
Internet Explorer
continue
®
4.0