Epson ChromaBlast 1.0 시작하기 매뉴얼 - 페이지 12

{카테고리_이름} Epson ChromaBlast 1.0에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson ChromaBlast 1.0 47 페이지. For epson stylus pro 4880
Epson ChromaBlast 1.0에 대해서도 마찬가지입니다: 소유자 매뉴얼 (13 페이지)

페이지 인쇄

Sawgrass Technologies, Inc.

ChromaBlast

Getting Started Guide for the EPSON Stylus Pro 4880

™

1. Ensure the printer power is on. Press the ink compartment cover to

release the latch and open the cover.

2. Raise the ink lever to the unlocked position.

The ink lever is located to the right of each ink

compartment. If you are installing a complete

set of ink cartridges, then install using the

following order starting from left to right:

Black (CB), Cyan (CB), Magenta (CB),

Yellow (CB), Black (CB), Cyan (CB),

Magenta (CB) and Yellow (CB).

Note: The cartridge label should be facing left as the cartridge is inserted

into it's slot.

Continue to step 5 below.

If you are just replacing an empty cartridge, then continue to step 3 and 4

below.

3. Remove the empty ink cartridge from the

printer.