Epson EasyMP Monitor 4.53 운영 매뉴얼 - 페이지 43

{카테고리_이름} Epson EasyMP Monitor 4.53에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson EasyMP Monitor 4.53 48 페이지. Operation guide - easymp monitor v4.53

An e-mail notifying the operator of a problem/warning/status is issued

Message

Network error (TCP

Check the following items.

connection error)

Check that the projector's power is turned on.

Check that the LAN cable is connected.

Check that Standby Mode is set to Communication

On (or Network On) or Network Monitoring is set to

On in the projector's configuration menu.

See your User's Guide for more information.

Network error

Check that the projector has been correctly

(ESC/VP.net

connected to the network. See your User's Guide for

communication error)

more information.

Network error

Check the projector's Monitor Password.

(Monitor Password

authentication error)

When the projector has 2 lamps, the additional information, such as (Lamp

1) or (Ballast 1), is displayed after the message so that you can know which

lamp has problems/warnings.

Messages to inform that the projector has recovered from the error or

warning statuses are sent.

Remedy