Connecting to a Projector on a Network and Projecting
Operating the Projector
Before connecting, put the projector into connection standby status.
Make sure the projector network settings are complete, and the projector is
connected to network equipment such as a network hub via a commercially
available network cable.
Procedure
A
Press the [
] button on the remote control to turn the power
t
on.
B
Press the [LAN] button on the Remote Control.
The LAN standby screen is displayed.
If there is no signal for the current input source, it automatically
switches to the LAN source. If it does not automatically switch to the
LAN source, press the [LAN] button.
Operating the Computer
In the following explanations, unless otherwise noted, Windows screen
shots are used. The similar screens are also displayed in Mac OS.
Procedure
A
Start EasyMP Network Projection.
For Windows
Select Start - Programs (or All Programs) - EPSON Projector -
EasyMP Network Projection - EasyMP Network Projection
V2.XX.
For Mac OS
Double-click the Applications folder of the hard drive volume in
which EasyMP Network Projection is installed, and then double-click
the EasyMP Network Projection icon.
B
Select "Quick Connection Mode" (only available when the
optional Wireless LAN unit is installed) or "Advanced
Connection Mode", and then click "OK".
The projector search results are displayed. To always connect using
Advanced Connection Mode, select Set the selected Connection
Mode as the default mode for future connections.
C
Select the projector you want to connect to, and then click
"Connect".
If the projector you want to connect to is not displayed in the search
results, click the Automatic search button. The search takes about 30
seconds.
For details on the connection screen, see "Using the Connection
Screen".
p.13
s
12
페이지 인쇄