Epson EMP Monitor 사용자 설명서 - 페이지 39

{카테고리_이름} Epson EMP Monitor에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson EMP Monitor 42 페이지. Emp monitor for projectors
Epson EMP Monitor에 대해서도 마찬가지입니다: 운영 매뉴얼 (11 페이지), 운영 매뉴얼 (12 페이지), 운영 매뉴얼 (34 페이지), 운영 매뉴얼 (14 페이지), 운영 매뉴얼 (37 페이지)

페이지 인쇄

Application lock function

You can use the application lock to prevent third parties from operating

the projectors using EMP Monitor and from changing settings without

authority. Opening and closing EMP Monitor and status monitoring can

still be carried out even when the application lock is applied.

In addition, when a password has been set, the password must be entered

in order to cancel the application lock. This ensures that the application

lock can not be easily cancelled, and thus improves system security.

Switching application lock between enabled and

disabled

Enabling the application lock

Procedure

Select "Application lock" from the Tool menu.

The application lock will be enabled and no operations will be possible

other than opening and closing EMP Monitor and disabling the

application lock.

Disabling the application lock

Procedure

Select "Application unlock" from the Tool menu.

The password entry window will be displayed, so enter the

set password and then click "OK".

If no password has been set (default setting), click OK without en-

tering a password. It is recommended that you enter a password in

order to strengthen security.

The application lock will be cancelled and operations can be carried

out as normal.

Setting a password for cancelling application lock

Carry out the following operations while application lock is cancelled.

Procedure

Select "Environment setup" from the Tool menu.

The Environment setup window will be displayed.

Select "Change the application lock password".

Enter the password in both the "New password" and "New

password (confirm)" boxes and then click "OK".

The password can be up to 16 bytes in length. Single-byte alphanumeric

characters can be used.