Epson EMP Monitor 운영 매뉴얼 - 페이지 10
{카테고리_이름} Epson EMP Monitor에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson EMP Monitor 14 페이지. Emp monitor for projectors
Epson EMP Monitor에 대해서도 마찬가지입니다: 운영 매뉴얼 (11 페이지), 운영 매뉴얼 (12 페이지), 사용자 설명서 (42 페이지), 운영 매뉴얼 (34 페이지), 운영 매뉴얼 (37 페이지)
페이지 인쇄
Main EMP Monitor window
Understanding the projector list
The projector list uses the following icons to show the projector statuses.
Status: Shows the projector status.
Power on and normal status
Power off and normal status
Power on and abnormal status
Power off and abnormal status
Network error (such as not connected to network or
power cord not connected)
Name: Shows the projector name.
Source: Shows the selected image source.
Computer, Computer1 or InputA
Computer2 or InputB
S-Video
Video
D4 (Digital)
DVI or HDMI (Digital)
Error information: Uses the following icons to show the status if an
error occurs with a projector.
End of lamp life warning
Lamp problem
High internal temperature
(overheating)
Temperature warning
Internal problem
Fan problem
Temperature sensor
problem
The projector information that is generated when a problem is detected is
stored until EMP Monitor is closed. The EMP Monitor displays will not be
updated automatically even if the projector status returns to normal. Click
[Refresh] in the main window to update the status.
9
Replace with a new lamp.
s"Replacing the Lamp"
in the "Replacing
Consumables" section of
the accessory User's Guide.
"Reading the Indicators"
sRefer to the
"Troubleshooting" section
of the accessory User's
Guide and carry out the
suggested remedy.