Epson ES-300C 매뉴얼 - 페이지 7

{카테고리_이름} Epson ES-300C에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson ES-300C 8 페이지. Laser & non-impact printer error codes
Epson ES-300C에 대해서도 마찬가지입니다: 제품 지원 게시판 (19 페이지), 보충 설명서 (15 페이지), 매뉴얼 (11 페이지), 제품 지원 게시판 (20 페이지), 제품 지원 게시판 (14 페이지), 제품 지원 게시판 (25 페이지), 제품 지원 게시판 (13 페이지)

페이지 인쇄
Epson ES-300C 매뉴얼
ES-300C SCANNER
Installation / Support Tips
Software
1.
When operating the EWOCIC scanner with an IBM
compatible computer, you must install the following:
o Software that supports the ES-3WC scanner or Epson's
Epscan II scanner program.
When operating the ES-3WC scanner with an Apple
2.
Macintosh computer, you must install the following:
Epscan II scanner program.
Note: To achieve the best final image, you may need tc make
multiple scans at various scanner settings.
set up
if you are using the scanner with an IBM-compatible computer,
connect the interface cable to the bidirectional parallel port on
the computer. Designate the interface board on the computer
as LPT2. Some systems may require that a bidirectional parallel
port be installed.
the SCSI interface board in the interface board slot. Then
connect the interface cable from the computer to the SCSI
connector on the scanner.
Scanners
6/30/90