Epson Fiery Spark Professional 2.0 빠른 설치 매뉴얼 - 페이지 9
{카테고리_이름} Epson Fiery Spark Professional 2.0에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson Fiery Spark Professional 2.0 34 페이지. Epson stylus pro 7600; epson stylus pro 9600; epson stylus pro 10000; epson stylus pro 10600;
페이지 인쇄
Installing the Server Software
Follow the instructions in this section to install the software on the server.
They describe how to:
Assign a static IP address (see below)
•
Name the server (see page 6)
•
Install the Fiery Spark Server software (see page 6)
•
Connect the hardware key (page 7)
•
Install Command WorkStation
•
Install ColorWise Pro Tools (optional, see page 11)
•
Before you begin, make sure you have:
Installed the EPSON printer driver (see your EPSON printer
•
documentation for instructions)
Connected the printer to the server using the USB interface (Stylus Pro
•
7600 and 9600) or the FireWire IEEE 1394 interface (Stylus Pro 10000
and 10600)
Closed all open programs and turned off any virus protection programs
•
Assigning a Static IP Address
1. Right-click
My Network Places
2. Select
Properties
3. Right-click
Local Area Connection
4. Select
Properties
5. Double-click
If the server is using a DHCP connection, skip ahead to "Naming the
Server" on page 6.
.
.
Internet Protocol (TCP/IP
Assigning a Static IP Address
™
(see page 8)
.
.
).
|
5