Epson FX 890 사용자 설명서 - 페이지 31

{카테고리_이름} Epson FX 890에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson FX 890 48 페이지. Impact printer
Epson FX 890에 대해서도 마찬가지입니다: 사양 시트 (1 페이지), 사양 (2 페이지), 매뉴얼 (11 페이지), 설정 매뉴얼 (2 페이지), 제품 정보 매뉴얼 (19 페이지), 빠른 참조 (12 페이지), 사양 (2 페이지)

페이지 인쇄
Epson FX 890 사용자 설명서

Using the Micro Adjust Function

The Micro Adjust function allows you to move the paper forward or
backward in 1/216-inch (0.118 mm) increments to adjust the tear-off and
top-of-form positions.

Adjusting the tear-off position

If your paper's perforation is not aligned with the tear-off edge, you can
use the Micro Adjust function to move the perforation to the tear-off
position, as described below. Your tear-off position setting remains in
effect until you change it, even if you turn off the printer.
Caution:
c
Never use the knob to adjust the tear-off position; this may damage the
printer or cause it to lose the tear-off position.
1.
You may need to press
the Tear Off/Bin button to
advance the paper to the
tear-off position. Make
sure the Tear Off/Bin
light is flashing (the paper
is at the current tear-off
position).
2.
Hold down the Pause
button for about three
seconds. The Pause light
begins flashing and the
printer enters the Micro Adjust mode.
Paper Handling
31