Epson FX-1180 - Impact Printer 빠른 매뉴얼 - 페이지 29

{카테고리_이름} Epson FX-1180 - Impact Printer에 대한 빠른 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson FX-1180 - Impact Printer 33 페이지. Epson serial impact dot matrix printers
Epson FX-1180 - Impact Printer에 대해서도 마찬가지입니다: 설정 매뉴얼 (33 페이지), 브로셔 및 사양 (24 페이지), 제품 정보 (17 페이지), 빠른 참조 매뉴얼 (16 페이지), 매뉴얼 (11 페이지), 사양 (2 페이지), 매뉴얼 (18 페이지), 사양 (2 페이지), 제한 보증 (1 페이지), 참조 매뉴얼 (34 페이지)

페이지 인쇄

Ribbon Cartridge

Genuine EPSON ribbon cartridge

When printing becomes faint, you need to

replace the ribbon cartridge. Genuine

EPSON ribbon cartridges are designed and

manufactured to work properly with your

EPSON printer. They ensure proper

operation and long life of the print head and

other printer parts.

Your printer uses the following ribbon

cartridge:

EPSON black ribbon cartridge

FX-880+:

FX-1180+:

Replacing the ribbon cartridge

Follow these steps to replace the ribbon

cartridge:

Warning:

You need to move the print head by hand

to replace the ribbon cartridge. If you have

just used the printer, the print head may

be hot; let it cool for a few minutes before

touching it.

Downloaded from:

http://www.usersmanualguide.com/

EPSON FX-880+/FX-1180+ Quick Guide

#8750

#8755

1. Make sure the printer is turned off. The

printer is off when the power switch is

pressed down to the N side.

2. If the printer is connected to an electrical

outlet, unplug it from the outlet.

3. Open the printer cover to the upright

position, then pull it up to remove it.

Ribbon Cartridge (1/3)