AEMC instruments MR 193-BK 사용자 설명서 - 페이지 14

{카테고리_이름} AEMC instruments MR 193-BK에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEMC instruments MR 193-BK 19 페이지. Current probes & sensors for power quality meters & power energy loggers

페이지 인쇄

1.800.544.2843

For Probes:

■ Press the jaw opening lever on the probe to open the jaws.

■ Clamp the probe around the conductor to be tested. For best results, center the

conductor in the jaws of the clamp.

For AmpFlex

and MiniFlex

■ AmpFlex

: Press simultaneously on both sides of the opening connector.

■ MiniFlex

: Press the opening device to open the flexible sensor.

■ Clamp the sensor around the conductor to be tested. For best results, center the

conductor in the jaws of the clamp.

■ Close the sensor by pushing the moving part into the connector until it clicks.

NOTE: For details of the measurement configuration and technical specifications,

refer to the user manual of the instrument the current probe is being used with.

Current Probes & Sensors for Power Quality Meters and Power Energy Loggers

www.calcert.com

Sensors:

[email protected]