Epson FX-880 - Impact Printer 빠른 참조 - 페이지 10

{카테고리_이름} Epson FX-880 - Impact Printer에 대한 빠른 참조을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson FX-880 - Impact Printer 12 페이지. Warranty statement
Epson FX-880 - Impact Printer에 대해서도 마찬가지입니다: 사양 시트 (2 페이지), 설치 매뉴얼 (10 페이지), 제품 정보 (17 페이지), 빠른 참조 매뉴얼 (16 페이지), 매뉴얼 (11 페이지), 사양 (2 페이지), 중요 정보 매뉴얼 (8 페이지), 조립 설명서 (8 페이지), 제한 보증 (1 페이지)

페이지 인쇄

7. Use a pointed object, such as a ball point

pen, to guide the ribbon between the print

head and ribbon guide while you turn the

ribbon-tightening knob to help feed the

ribbon into place.

8. Slide the print head from side to side to

make sure it moves smoothly.

9. Install the paper tension unit by placing

it on the printer's mounting pegs and

lowering it into place. Press down on both

ends of the unit until it clicks into place.

10. Replace the printer cover.

Clearing Paper Jams

1. Press the Operate button to turn off the

printer.

2. Open the printer cover.

3. If continuous paper is jammed in the

printer, tear off the fresh supply at the

perforation nearest the paper entry slot.

4. Turn the knob on the left side of the printer

away from you to eject the remaining

paper.

Caution:

Always turn off the printer befor you use

the knob; otherwise the printer may be

damaged or the top-of-form or tear-off

position may be lost.

5. Remove any remaining pieces of paper. If

any paper is stuck where the printer ejects

it, gently pull the paper out of the printer.

6. Close the printer cover and press the

Operate button to turn on the printer.

Feed the ribbon into place.

Place the paper tension unit on the printer's

mounting pegs and lower it into place.

Tear off the fresh supply of continuous paper at the

perforation nearest the paper entry slot.