Epson LQ-590 사용자 설명서 - 페이지 25

{카테고리_이름} Epson LQ-590에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson LQ-590 48 페이지. 24pin dot matrix printers
Epson LQ-590에 대해서도 마찬가지입니다: 매뉴얼 (11 페이지), 빠른 참조 (12 페이지), 기술 요약 (7 페이지), 사양 (2 페이지), 사양 (2 페이지), 사양 (4 페이지), 여기에서 시작 (2 페이지)

페이지 인쇄

10. If you load paper in the

front slot, reattach the front

cover.

If you have the LQ-2090,

remove the sub cover from

the front cover before

replacing the front cover. Be

sure to reattach the sub cover

when you want to print from

a different paper source.

11. Turn on the printer.

12. Remove any slack in the paper by pressing the LF/FF button.

When the printer receives data, it will start printing at the current

position without advancing the paper. If necessary, adjust the top of

form position using the Micro Adjust function (see page 33).

Caution:

Never use the knob to adjust the top-of-form position; this may

damage the printer or cause it to lose the top-of-form position.

13. Attach the printer cover by inserting the front tabs into the slots,

then lowering the cover into place. Close the paper guide cover.

14. Send a print job to the

printer. The printer starts

printing from the

top-of-form position.

After you finish printing,

open the paper guide

cover and tear off the

printed document at the

perforation nearest the

paper exit slot.

Paper Handling