Epson LQ-590 사용자 설명서 - 페이지 29

{카테고리_이름} Epson LQ-590에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson LQ-590 48 페이지. 24pin dot matrix printers
Epson LQ-590에 대해서도 마찬가지입니다: 매뉴얼 (11 페이지), 빠른 참조 (12 페이지), 기술 요약 (7 페이지), 사양 (2 페이지), 사양 (2 페이지), 사양 (4 페이지), 여기에서 시작 (2 페이지)

페이지 인쇄
Epson LQ-590 사용자 설명서
Note:
It is best to load continuous paper with labels on the pull tractor. Do not
load labels on the rear or front push tractor.
Do not load continuous paper with labels from the rear paper slot. Because
the rear paper path is curved, labels may come off their backing sheets
inside the printer and cause a paper jam.
Do not load paper that is curled or has been folded.
Never feed labels backward using the Load/Eject or Tear Off/Bin button.
When fed backward, labels can easily peel off the backing sheet and cause a
paper jam.
Because labels are sensitive to temperature and humidity, use them only
under normal operating conditions:
Temperature
Humidity
Do not leave labels loaded in the printer between jobs; they may curl
around the platen and jam when you resume printing.

Removing continuous paper with labels

To prevent labels from peeling off the backing sheet and jamming the
printer, follow these steps to remove continuous paper with labels from
the printer:
1.
Tear off the fresh supply of
continuous labels at the
perforation nearest the paper
entry slot.
2.
Hold down the LF/FF button to eject the remaining labels from the
printer.
Caution:
c
Never feed labels backward using the Load/Eject or Tear Off/Bin button.
When fed backward, labels can easily come off the backing sheet and cause a
paper jam.
59 to 77 °F (15 to 25 °C)
30 to 60% RH
Paper Handling
29