Epson Message Broadcasting 시작하기 매뉴얼
{카테고리_이름} Epson Message Broadcasting에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson Message Broadcasting 9 페이지. Plug-in for easymp monitor
Epson Message Broadcasting에 대해서도 마찬가지입니다: 시작하기 매뉴얼 (9 페이지)
페이지 인쇄Message Broadcasting
Message Broadcasting is a plug-in for EMP Monitor. Administrators
can use the plug-in to send messages or announcements to one or
more projectors or all the projectors on the network. You can send
messages manually, or use the Timer function in EMP Monitor to
have messages sent automatically.
You can use Message Broadcasting to send images in JPEG format.
The maximum resolution for an image is 1920 × 1200 pixels.
Getting Started
Before you install the Message Broadcasting plug-in, make sure EMP
Monitor (version 4.30 or later) is installed, and your projectors are
registered in EMP Monitor. Make sure your projectors support
Message Broadcasting; check epson.com/support if necessary.
Follow the instructions on the Epson website for downloading and
installing.
®
You need to use a networked Windows computer running Windows
®
Vista
, XP, or 2000 Professional to install the plug-in.
If any of the projectors you select are switched off, they will power on
automatically when you begin Message Broadcasting. For network
communication, make sure the
setting in the
Standby Mode
projectors' Extended menu is set to
.
Communication On
Message Broadcasting
1