Epson NX-Epson 제품 지원 게시판 - 페이지 17

{카테고리_이름} Epson NX-Epson에 대한 제품 지원 게시판을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson NX-Epson 17 페이지. Using with ms windows 3.x stylus 400/800+/color printer driver
Epson NX-Epson에 대해서도 마찬가지입니다: 제품 지원 게시판 (15 페이지), 제품 지원 게시판 (3 페이지)

페이지 인쇄

ENDEAVOR WG / PROGRESSION 4

VER

PART #

1.04.1.08

1.06.1.09

2013112

1.06.1.09

2013113

1.13.1.14

201311201

1.13.1.14

201311301

DESC

TYPE

SYSTEM

27C010

SETUP

27C512

SYSTEM

27C010

SETUP

27C512

SYSTEM

27C010

SETUP

27C512

PSB No.: S-0062I

Page: 1 of 18

LOC

REASON

INITIAL RELEASE

U113

Three text modes 62h,64h and 65h

U113

have been restored. Incorporated new

VGA BIOS (v1.10.03) which changed

mode 072h (1024X768X4) back to

interlaced. Fixed problem between

EMM386.EXE and User defined HDD

parameter tables from the BIOS

extended data area into the shadow

RAM. Fixes problem where User

Defined HDD table different from pre-

defined HDD for the same drive by

one cylinder. Fixed problem in pre-

defined HDD tables where control byte

was not properly set for some drives

with more than 8 heads. Added

WD1170 HDD in the pre-defined HDD

table as type 30. (SEE ECN NO:

ENDVWG-001) 08/06/93.

Corrected jagged cursor display in

U113

interlaced mode with the BT-482

RAMDAC when using the hardware

cursor Wingine display drivers. Serial

BIOS has been expanded to support

COM3 and COM4. Parallel BIOS has

been corrected to provide support for

LPT1-LPT3. Corrected inability to run

SETUP when an adaptec AHA-1540C

or 1542C SCSI host adapter is

installed by modifying POD to run

external ROM initialization routines

just prior to invocation of SETUP.

Corrected timing of parallel port

STROBE signal to allow for slow rise

time and longer cable lengths.

Removed internal cache test. The

cache test failed, regardless of cache

condition. Since the 80486 CPU

perform internal cache testing at

power-up, disabling the POD cache

test will not affect system

performance. (SEE ECN NO:

PROG4-002) 12/03/93.