Epson PC Free 운영 매뉴얼 - 페이지 14

{카테고리_이름} Epson PC Free에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson PC Free 22 페이지. Operation guide - pc free

페이지 인쇄

Projecting Image and Movie Files

Perform one of the following procedures to end playback.

When playback has been ended, the file list will be displayed.

• While projecting still images: Press the Esc button.

• While projecting movies: Press the Esc button. On the screen that is

displayed, select Exit, and then press the Enter button.

• Images can be rotated while projecting image files. s

• You can make the following operations using the remote control while

playing movie files.

Fast-forward: Press the [h] button in the [ ] direction.

Rewind: Press the [h] button in the [ ] direction.

Freeze (pause): Press the [h] button in the [

Three fast-forward/rewind speeds are available, and the speed changes

each time the button is pressed.

To return to normal playback, press the Enter button.

Audio is not output while fast-forwarding, rewinding, or pausing are in

progress.

Projecting Image Files in a Folder in Sequence

(Slideshow)

You can project the image and movie files in a folder in sequence, one at

a time. This function is called Slideshow. Perform the Slideshow by the

following procedure.

You can set display conditions, such as projecting repeatedly and adding

display effects while files are being switched. To change movie and image

files automatically when you run Slideshow, set the Screen Switching Time

in the PC Free Option menu to anything other than No. The default setting

is No. s "Operation setting for slideshow"

p.10

] direction.

p.14

Procedure

Start PC Free. s

p.7

The file list screen is displayed.

Press the [h] button on the remote control or [w/

[v/

], [</ ] and [>/ ] buttons on the control panel to

position the cursor over the folder for the Slideshow, and

then press the Enter button.

Select Slideshow from the file list screen, and then press the

Enter button.

The Slideshow starts and the image and movie files in the folder are

automatically projected in sequence, one at a time.

When the last file is projected, the file list screen is automatically

displayed again. If you set Continuous Play to On in the Option

menu, projection will start from the beginning again when the end

is reached. s "Operation setting for slideshow"

Just as with a scenario, you can proceed to the next screen, return

to the previous screen, or stop playback during projection of a

Slideshow. s "Operations While Playing Back Scenarios"

• If the Screen Switching Time setting in the Option menu is set to No, files

do not change automatically when you start a Slideshow. Press the Enter

button or the Page (]) button on the remote control to continue to the next

file.

• To end playing back Slideshow, press the Esc button. On the message

window that is displayed, select Exit, and then press the Enter button.

Operation setting for slideshow

You can set the file display order and slideshow operation in the Option

menu.

p.14

p.11