Epson PC Free 운영 매뉴얼 - 페이지 20
{카테고리_이름} Epson PC Free에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson PC Free 22 페이지. Operation guide - pc free
![Epson PC Free 운영 매뉴얼](/uploads/products/server2/620267/620267.jpg)
Other functions
Registering a Digital Certificate to the Projector
When Security is set to EAP-TLS from the projector's Network menu,
you need to register the client certificate and the CA certificate in the
projector for authentication.
This section describes the method for using PC Free to register a digital
certificate that has been saved in a USB storage device, to the projector.
Digital certificates that can be registered
Only one set of client certificate and CA certificate can be registered in
the projector. If another digital certificate is registered, it overwrites the
previous certificate.
Type
Exten
sion
Client certificate
.pfx
Certificates without passwords (NULL) cannot
be used.
CA certificate
.cer
Certificates encoded in binary format (DER).
Certificates encoded in base64 cannot be used.
Registering a Client Certificate
Procedure
A
Connect the USB storage device on which the digital
certificate is stored to the projector and start PC Free. s
The file list screen is displayed.
Notes
p.7
B
Press the [h] button on the remote control or [w/
[v/
], [</ ] and [>/ ] buttons on the control panel to
position the cursor over the client certificate (PFX file) icon,
and then press the Esc button.
C
Select "Digital certificate" from the menu displayed, then
press the Enter button. The following screen is displayed.
D
Enter the password using the soft keyboard. (you can enter
up to 32 single-byte alphanumeric characters)
20
],