ECI LiteWizard 설치 매뉴얼 - 페이지 7

{카테고리_이름} ECI LiteWizard에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ECI LiteWizard 9 페이지.

7.4 LiteWizard™ Configuration

There are 6 configuration switches on the LiteWizard board. See Figure 1- LiteWizard Circuit Board.

Each switch pertains to one of the inputs. If the input is used the associated switch number must be in the

ON position.

Configuration switches must be set before applying power to unit.

NOTE: Switch 6 must be ON for all configurations whether it is used or not.

Each input has an associated jumper for the input voltage level ranging from 6 to 110 volts AC or DC.

Warning: Be sure to set the jumper to the appropriate voltage level or permanent

damage to board may result.

LiteWizard™ Installation Manual

Figure 1- LiteWizard Circuit Board

Electronic Controls, Inc.

7073 North Atlantic Ave. Cape Canaveral, FL 32920

800-633-9788

www.eciamerica.com

AC POWER INPUT

OPTION SWITCHES

TEST BUTTON

P a g e

| 7