Eci Telecom B-FOCuS 12+ 사용자 설명서 - 페이지 12

{카테고리_이름} Eci Telecom B-FOCuS 12+에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Eci Telecom B-FOCuS 12+ 16 페이지.

B-FOCuS Router 312+

Buttons and LEDs

5.1

This section describes the ports and buttons on the router.

ADSL

Port

Figure 2. B-FOCuS Router 312+ Back Panel

• Reset Button. To reset the router, press and release the Reset button;

after about 30 seconds the unit will become operational.

• Restore to Factory Defaults. You may need to restore the factory

defaults if the configuration of your unit is changed, if you lose both

network connectivity and the ability to interface to the unit via the web

interface, or following a failed software upgrade. To restore factory

defaults, press the Reset button for more than 10 seconds. The unit

reverts to its factory defaults and after about 30 seconds becomes

operational again.

• LAN (Local Area Network) Port. Connect to Ethernet network

devices, such as a PC, hub, switch, or router. Depending on the

connection, you may need a cross-over cable or a straight-through

cable.

• Power. Make sure you observe the proper power requirements.

• ADSL Port. WAN interface that connects directly to the phone line.

ECI Telecom Ltd. Proprietary

Reset

Button

LAN

Port

DWG# 458006-0833-010 A00

User Guide

Power

On/Off

Button