Eci Telecom B-FOCuS 312 사용자 설명서 - 페이지 16

{카테고리_이름} Eci Telecom B-FOCuS 312에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Eci Telecom B-FOCuS 312 16 페이지.

B-FOCuS Router 312+

• Disable your network card and then enable it.

• Delete your temporary Internet files, history files, and cookies.

• Verify that your Windows LAN is configured for dynamic IP Addresses.

• Verify that none of your applications are trying to create a dial-up

connection to the Internet.

• If your router does not work after performing all the steps above, press

the reset button on the back panel for 10 seconds until the ADSL Sync

lamp turns off. The router will revert into its factory default settings.

Perform the above procedures again.

6.2

The ADSL Link LED Blinks but Does Not Go

Solid

The ADSL line is trying to train but for some reason it cannot establish a valid

connection. You are too far from the telco central office. Contact your DSL

service provider for further assistance.

6.3

Make sure you have ADSL service. You should get some kind of information

from your ISP that states that ADSL service is installed. You can usually tell if

the service is installed by listening to the phone line; you will hear some high-

pitched noise. If you cannot hear high-pitched noise, contact your ISP.

Verify that the phone line is connected directly to the wall socket and to the

ADSL input on your router. If you have installed a splitter on the phone line, and

accidentally connected the router to the phone side, the ADSL light will not

come on.

ECI Telecom Ltd. Proprietary

DWG# 458006-0833-010 A00

User Guide