Dimplex 6910470400 서비스 매뉴얼 - 페이지 12

{카테고리_이름} Dimplex 6910470400에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dimplex 6910470400 17 페이지.

Temperature Sensor (NTC) Replacement

Tools Required: Phillips Head Screwdriver

Side Cutters

1. Follow the instructions for Preparing the Firebox for Service on page 6.

2. Remove the 2 screws on the NTC bracket. (Figure 16)

3. Trace the NTC wire to the main control board.

4. Disconnect the NTC and remove it, cutting any restrictive wire ties. Make note of the location of the NTC connector.

5. Feed the connector from the new NTC toward the main control board, and connect it into the correct location.

6. Secure the new NTC on the NTC bracket using the provided wire tie.

7. Secure the bracket using the 4 screws previously removed.

8. Reassemble the fireplace, ensuring the NTC wire is secured away from the mirrored glass when re-installing it.

Figure 16

NTC Bracket