Dimplex 6910470400 서비스 매뉴얼 - 페이지 8

{카테고리_이름} Dimplex 6910470400에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dimplex 6910470400 17 페이지.

Power Supply Replacement

Tools Required: Phillips Head Screwdriver

Side Cutters (to cut wire ties)

1. Follow the instructions for Preparing the Firebox for Service on page 6.

2. Remove the 4 screws that hold the electronics cover panel. (Figure 7)

3. Remove the 2 screws that hold the power supply bracket. (Figure 7)

4. Trace the wires from the defective power supply to the relay board.

5. Cut wire ties that secure the bundles of wire that include the wires from the power supply. Set the rubber sleeve

aside.

6. Replace the connections on the relay board from the defective power supply to the new power supply.

7. Reinstall the rubber sleeve around the bundle of wires and secure it using the 3 of the provided wire ties.

8. Secure the wires previously bundled using one of the provided wire ties.

9. Position the new power supply and secure it using the previously removed power supply bracket.

10. Reinstall the electronics cover panel.

11. Reassemble the fireplace.

Figure 7

Electronics

Cover Panel

Power Supply Bracket