Dimplex BF33DXP 소유자 매뉴얼 - 페이지 7

{카테고리_이름} Dimplex BF33DXP에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dimplex BF33DXP 14 페이지. Fireplace
Dimplex BF33DXP에 대해서도 마찬가지입니다: 실용적인 사용자 설명서 (15 페이지), 서비스 매뉴얼 (20 페이지), 사용자 설명서 (14 페이지), 문제 해결 매뉴얼 (2 페이지), 소유자 매뉴얼 (14 페이지), 설치 매뉴얼 (14 페이지)

페이지 인쇄

Operation

Wall Mounted Switches

This model may be installed

so that a wall mounted switch

energizes the firebox and

flame, (On/Off Switch must

be in the ON position). A

wall mounted switch may

also be used to override the

flame image, (On/Off Switch

must be in the ON position

in coordination with any

main power wall mounted

switch). A wall mounted

switch may also be used

to override the heater/Puri-

fire

option (Mode Selector

Switch must be in the "="

position).

Wall Mounted Thermostat

This unit may be installed so

that a wall mounted ther-

mostat can adjust the heat

temperature to your individual

requirements. Please refer

to thermostat manufacturers

operation Instructions. Mode

Selector Switch must be

set to "=" for thermostat to

control heater/Purifire

Wall Mounted Remote Con-

trols (WRCPF-KIT)

Dimplex manufactures a

optional wall mounted remote

control which allows the user

to fully control the fireplace

from a central location with

the added functionality of a

built in thermostat.

Resetting The Tempera-

ture Cutoff Switch

The heater on this fireplace is

protected with a safety device to

prevent overheating. should the

heater overheat, the overheat

indicator will be activated (Fig. 1),

and an automatic cutout will turn

the heater off and it will not come

back on without being reset. It

can be reset by switching the on/

off switch to oFF and waiting 5

minutes before switching it to on.

The overheat cutout will be trig-

gered if the filter is dirty. Follow

filter

CAUTION:

continuously reset the heater, dis-

connect power and call Dimplex

customer service at

(1-888-346-7539).

! NOTE:

a slight, harmless odor when first

used. This odor is a normal con-

dition caused by initial heating of

internal heater parts and will not

occur again.

maintenance.

If you need to

The heater may emit